Services About Us Service Area FAQ Compare Contact Get a Free Estimate (440) 370-6774
Fast, Reliable Service

Emergency Furnace Repair in Northeast Ohio

When your heat stops working, we respond. Same-day service available across Amherst, Elyria, Vermilion, and surrounding areas.

We Answer Every Call
Same-Day Service Available
Upfront Pricing — You Approve Before We Start
Licensed & EPA-Certified
Family-Owned & Locally Trusted
All Work 100% Guaranteed

Your furnace keeps your Northeast Ohio home warm through brutal winters. When it fails—especially on a Friday night or below-zero morning—every minute counts. T&T Heating & Cooling responds to emergency furnace calls reliable, and we complete most repairs the same day. We serve Lorain, Vermilion, Amherst, Defiance, Napoleon, Elyria, Maumee, and the surrounding 40-mile radius. Our EPA-certified technicians diagnose the problem correctly the first time, give you upfront pricing before we touch anything, and back every repair with a 100% guarantee.

Call (440) 370-6774

Signs Your Furnace Needs Repair

When your furnace starts making noise—grinding, banging, or a high-pitched screech—something is wrong. Common furnace problems we see across Northeast Ohio include: your furnace won't ignite (no heat at all), it cycles on and off every few minutes (short cycling), warm air blows for 30 seconds then stops, the pilot light is out or keeps going out, you're hearing metal-on-metal sounds, or your utility bills from Lorain Edison or AEP Ohio spike without explanation. You might also notice cold spots in rooms, a burning smell when the system starts, or the furnace running constantly but not warming the house. Some issues are simple—a dirty filter, thermostat miscalibration, a broken draft inducer motor. Others demand professional attention: a cracked heat exchanger is dangerous and needs immediate service. Don't wait. Call us to schedule a diagnosis.

How Long Does Furnace Repair Take?

Most furnace repairs are completed the same day. Once our technician arrives, they run a full diagnostic (typically 30-45 minutes), identify the problem, give you a quote with parts and labor clearly separated, and get your approval before they turn a wrench. Simple repairs—a thermostat fix, a motor replacement, a valve adjustment—often take 1-2 hours. A heat exchanger replacement, blower assembly work, or complex control board issues may take 3-4 hours. We keep common parts in our trucks so we rarely have to leave and come back. For emergency calls (nights, weekends, holidays), we dispatch the closest available technician. You pay the same rate—no hidden emergency surcharge.

Most Repairs Completed Same Day

Don't wait for heat or cooling. Get relief fast with T&T Heating & Cooling.

Get a Free Estimate

Furnace Repair Costs in T&T Service Area

Furnace repair costs depend on what's broken. A service call plus diagnosis runs $85-$125. A simple fix like a thermostat replacement or a capacitor costs $150-$300 all-in. A blower motor runs $400-$700. A heat exchanger replacement (the most expensive repair on most furnaces) is $1,200-$2,000 depending on your system. If your furnace is over 15 years old and needs major work, we'll talk replacement options too—sometimes a new system costs less than repairing an old one over the next 5 years. We always give you the choice. Got a bad heat exchanger on a 1998 furnace? We'll repair it if you want, or we'll show you what a new high-efficiency system would cost and save you in heating bills. We handle financing through trusted partners if a large repair feels tight on your budget.

Why Your Furnace Needs Professional Diagnosis

Furnaces are not DIY-friendly. The gas line, electrical connections, draft inducer, and heat exchanger all require training and certification. A misdiagnosis wastes your money. A wrong repair can damage the system further or create a safety hazard (carbon monoxide leak). Our EPA-certified technicians have diagnosed thousands of furnaces across Elyria, Napoleon, and throughout Northeast Ohio. We use a combustion analyzer to check CO levels, a multimeter to test electrical circuits, and a pressure gauge to verify gas flow. We also check ductwork flow and blower performance to make sure the whole system is balanced. That thoroughness costs a little more upfront but saves you from multiple service calls chasing the wrong problem.

Emergency Furnace Service reliable

Winter nights in Amherst and Defiance get brutally cold fast. If your furnace fails at 2 a.m. on a December Saturday, you don't want voicemail. T&T Heating & Cooling picks up, dispatches a technician, and works around the clock to restore heat. We don't charge extra for nights, weekends, or holidays—same service charge as a weekday call. For true emergencies (no heat in freezing weather), we prioritize your call. If your furnace is repairable, we fix it same-day. If it needs parts we don't stock, we get you a temporary heater (space heaters, portable units) so your family stays warm while we source the replacement part.

Why Choose T&T Heating & Cooling for Furnace Repair?

Family-Owned & Local, we've repaired furnaces in Lorain, Vermilion, Maumee, and every small town in between. Our technicians are local. They know Northeast Ohio's climate, the older homes with original furnaces, and the new construction with modulating systems. We show up on time, we listen to your concerns, and we fix the problem right. We also offer preventive maintenance plans so your furnace doesn't fail in the first place. Annual inspections catch worn parts before they break, clean the heat exchanger for efficiency, and give you peace of mind heading into winter. Every repair comes with our guarantee—if it doesn't work after we leave, we come back at no charge.

Our Services

Comfort, Covered Top to Bottom

Frequently Asked Questions

The blower motor is the most common furnace repair we handle. When the motor wears out, your furnace runs but no warm air reaches your rooms, or it blows only cold air. Capacitor failure is second—it's a cheap part ($30-50) but the repair cost includes diagnosis and labor. Both are usually same-day fixes.
No. Furnaces use natural gas, 120V electrical, and high-temperature components. A single mistake—a loose gas fitting, a crossed wire, or an improper thermostat connection—creates a carbon monoxide hazard, fire risk, or expensive damage. Call a licensed technician. Your safety and homeowner's insurance depend on it.
You should get your furnace inspected and cleaned at least once per year, ideally before winter. Annual maintenance (also called a tune-up) catches problems early, keeps your system running efficiently, extends its life, and can lower heating bills by 5-10%. We offer maintenance plans that include spring and fall check-ups.
A furnace diagnostic (service call plus full inspection) costs $85-$125. That fee applies toward the repair if you approve the work. If you decline the repair and call someone else, the diagnostic is your cost. We believe in transparent pricing—you know what you owe before we start.
Short-cycling usually means your thermostat is set wrong, the furnace overheats and shuts off for safety, or a pressure switch is stuck. Overheating happens when airflow is blocked (dirty filter, closed vents, ductwork leak). A clogged furnace filter restricts air, the heat builds up, and the safety switch trips. Replace your filter and reset your thermostat. If it still cycles, call us for a diagnosis. Blower issues, cracked heat exchangers, and faulty limit switches all cause short-cycling too.
A natural gas leak smells like rotten eggs (a chemical additive called mercaptan). If you smell that, don't use your furnace. Open windows, leave the house, and call your gas utility immediately (not us—gas leaks are utilities' responsibility). Also look for a visible crack in the heat exchanger or corrosion around gas fittings. Any of those warrant professional inspection. We check all gas connections during repairs and maintenance visits.
Repair fixes what's broken. Replacement means buying and installing a new furnace. If your furnace is under 10 years old and the repair costs less than $1,000, repair usually makes sense. If it's over 15 years old, breaks often, or needs a $1,500+ repair, a new high-efficiency system might save money long-term. We give you both options with honest cost-benefit analysis.

Still have questions? Call us at (440) 370-6774 or request a free estimate.

Free Estimate

Request Your Free Estimate

Tell us what you need and we'll be in touch fast. Honest pricing, no pressure — just dynamite comfort.

Your information is sent securely to T&T Heating & Cooling. We never share or sell your details.

Request Received!

Thanks! T&T Heating & Cooling will reach out shortly to get you taken care of.